Specifications - Sanyo TLS-9072 Instruction Manual

SPECIFICATIONS

General Specifications
Video heads system
Audio recording
Tape speed
Specified video cassette tape
Recording/playback time
Fast forward/rewind time
Television system
Video
Recording method
Video input
Video output
Horizontal resolution
Audio
Input
Output
Microphone input
Connectors
Alarm input
Alarm output
Switch output
Tape end output
Warning output
Ext timer input
Common
Remote control input
Other Specifications
Operating temperature range
Operating humidity range
Power requirements
Power consumption
Dimensions
Weight
NOTE:
The specifications and external appearance of this unit are subject to change without notice.
Dual-azimuth 4-head rotating helical scanning system:
Dual azimuth 2-head for record and standard playback
Dual azimuth 4-head for forward picture search, reverse picture search
and still mode
In 2-, 12- and 24-hour modes
33.35 mm /sec (2-hour mode)
VHS 1/2 inch video cassette tape
2, 12, 24, 48 and 72 hours (when using T-120 tape)
approximately 2 minutes 45 seconds (when using T-120 tape)
NTSC color TV system
Luminance signal: FM recording
Chrominance signal: Down-converted direct recording
1 V(p-p), BNC, 75 , unbalanced
1 V(p-p), BNC, 75 , unbalanced
Black & white mode
Color mode
–8 dBs, RCA pin jack, 27 k , unbalanced
–8 dBs, RCA pin jack, 600 , unbalanced
–60 dBs, 3.5 mm mini jack, 10 k , unbalanced
Low level active (0V 100msec or more)
DC 5 V ( 0.5)/5.7 k , Low at alarm
DC 5 V ( 0.5)/5.7 k , Low at switching
DC 5 V ( 0.5)/5.7 k , Low at tape end
DC 5 V ( 0.5)/5.7 k , Low at warning
Low level active (0V 100msec or more)
0 V (GND)
3.5 mm mini jack
5°C to 40°C
80% or less
120 V AC, 60 Hz
17 W
420 (W) x 99.5 (H) x 295.5 (D) mm
approximately 4.4 kg
38
350 line or more
300 line or more
English