7.13. Remove the Plasma panel sec-
tion from the Cabinet assy
(glass)
1. Remove the cabinet assy and the plasma panel fastening
screws (×3
).
2. For leaving the plasma panel from the front frame, pull the
bottom of the cabinet assy forward, lift, and remove.
7.14. Remove the Glass holders
1. Remove the Cabinet assy. (See section 7.13.)
2. Remove the screws (×4
3. Remove the Glass holder side (L, R).
4. Remove the screws (×7
5. Remove the Glass holder top.
6. Remove the screws (×5
7. Remove the Glass holder bottom.
7.15. Remove the K-Board
1. Remove the Glass holders. (See section 7.14.)
2. Remove the screws (×2
3. Remove the claws (×2
4. Disconnect the connector (K1) and Remove the K-Board
from LED Panel.
25
).
).
).
).
).