Page 2
This manual corresponds to the following references: 0012994 SCD for CD 0014706 SCDA for CA and CF 0014720 SCDD for CDD 0014719 SCDP for CP Packing List The following items are included: Tool Holder....1 unit Manual ....... 1 unit Ref.
Page 3
Changing the Tool Holder Turn the station off and allow the equipment to cool down. Remove the locking knob (1) and separate the holder from the station. Then remove the connection screw (2). Locking Connection max. Knob Screw 15 mm Pull the tool holder gently until the connector comes out.
Page 4
4.37 x 3.19 x 1.61 in Complies with CE standards. Warranty JBC’s 2 year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labour. Warranty does not cover product wear or misuse. In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased.