Wireless Mode - Philips VTR6000 Manual

9 Wireless Microphone Mode
Select Wireless Mode on the main interface, press MENU to enter.
Make sure to switch wireless MIC on. There are two built-in
frequency channels available in the system. Please set the device's
working channel and the working channel of the wireless microphone
to the same channel, for example: if the device's working channel is
set at Channel 1, then the wireless microphone's working channel has
to be set at Channel 1 too. If the channels don't match, the device
cannot record sound from the wireless microphone.
Wireless reception interface picture as follows:
Note: please plug in the earphones. They allow radio reception.
Sound can only be heard in the earphones.
On this interface, press " " or " " to switch channel. After the
channel is set, press "PLAY" button to enter recording mode through
wireless reception. In order to start wireless recording, the wireless
microphone must be working on the same channel with the device.
See the below interface picture of Wireless Mode:
76