Layering Two Tones - Casio Privia PX-300 User Manual

To Select effect type
You can select from among four reverb effects and four
chorus effects by pressing the keyboard keys shown
below.
1 Reverb Effect Keys
1: Room 2
0: Room 1
L L L L
C1 C2 C3 C4
While holding down the CONTROL
1
button, press one of the keyboard keys
shown above.
413A-E-011A
3: Hall 2
2: Hall 1
L L L L
C5 C6 C7 C8
2 Chorus Effect Keys
1: Chorus 2 3: Chorus 4
0: Chorus 1 2: Chorus 3
Playing with Different Tones

Layering Two Tones

Use the following procedure to layer to two tones, so
they sound at the same time.
PREPARATION
• If you plan to use a variation tone, perform the procedure
on page E-7 to select the variation tone for the applicable
TONE button(s) before starting this procedure.
While holding down the TONE button of
1
one of the tones you want to use (the base
tone), press the TONE button of the other
tone (the layered tone).
Example: Press GRAND PIANO 2 button and
STRINGS button at the same time.
• This causes the indicator lamp of the base tone
to light, and the layered tone to flash.
• If the base tone (the one you pressed first) is a
variation tone, the indicator lamp above the
VARIATION button will light.
GRAND PIANO 2
STRINGS
• The tones are now layered.
After you are finished using the layered
2
tones, press one of the TONE buttons again
to unlayer them.
NOTE
• Note that you cannot layer the main tone and
variation tone assigned to the same TONE button.
E-9