Voltage Specification; Menu Structure - Flash Logo 200W IP65 User Manual

User Manual •Instrukcja Obsługi

5.2 Voltage specification

Input Voltage
110-240V
5.3 Connecting power supply
The connection is performed using
power cable with PowerCon connector
( i n c l u d e d ) . T h e d e v i c e m u s t b e
operated by qualified personnel.

Menu Structure:

DMX
ERR
Total Power
CAUTION! In the case of cable damage do not attempt to repair.
Replacement or repair can be made only on the manufacturer or by
a person with appropriate permissions.
Using lamp, the change rate of power voltage should be within
± 10%, if the voltage is too high, it will shorten the light's life; if it's
not enough, the lamp will be dark. Please restart it after turning
off light for 20 minutes until full-cooling. Frequent switching will
reduce the life span of lamps and bulbs; intermittent using will
improve the life of bulbs and lamps.
LCD DISPLAY
250W
Make sure that the power grid supply
parameters are consistent with device
parameters and limitations are not
exceeded.
Frequency
50/60Hz
UP
FUNC ENTER
DOWN