Advertisement
BT V2.1 RS-232 adapter user manual V2.2_Male
(Default)
FLOW=
(Default)
KEY=
(Default)
MAC=
NAME=
(Default)
ONE=
(Default)
PARITY=
(Default)
PIN=
N
Command characters received from the UART are not echoed back to
the DTE/DCE.
Y
Command characters received from the UART are echoed back to the
DTE/DCE.
?
Inquire the current setting.
This command enable or disable flow control signals (CTS/RTS) of the
UART port. Note, the setting is not affected by DEFAULT.
The command will need 1 second delay.
N
Disable flow control.
Y
Enable flow control.
?
Inquire the current setting
The key value will be created by the smart phone or Win10 devices
when pairing with the slave adapter. Please type the same 6 numbers
shown on the smart phone or Win10 devices within 15 seconds.
N
Y
?
The mac. Address will be customized by the user. The master will
connect the 2
damaged.
The head of the address 0012, 0018, 0019 is available only.
xxxxxxxxxxxx
?
This command is used to specify a name for the adaptor.
You can specify a friendly name using 0 to 9, A to Z, a to z, space and
–, which are all valid characters. Note that "first space or -, last space or
– isn't permitted". The default name is "Serial Adaptor".
Serial
Default device name
Adapter
xx....xx
"xx....xx" is a character string with the length from 2 to 30.
R
Restore the default settings name="Serial Adapter".
?
Inquire the name of the local adaptor.
The master will link with one paired or any nearby slave automatically.
All the slaves with the same pin code will be connected. Once
connected, the master will not change the paired slave until reset to
default from the slave. The command is available under the command
"auto=y".
N
The master will link with any nearby slave automatically.
Y
The master will link with the paired slave which is linked by the master
before automatically.
?
Inquire the current setting
This command is used to specify parity bit setting of COM port.
N
None parity bit
O
Odd parity
E
Even parity
?
This command is used to specify a PIN. The default PIN is (None) and
the length is not smaller than 4. The master will connect the slave first
nd
slave with the same mac. address if the 1
4
2021.12.15
st
slave
Advertisement
