Menu Bar - Sanyo PLC-SW10 Owner's Manual

BEFORE OPERATION
MENU BAR IN COMPUTER MODE
MODE MENU
Used to select
the Computer
input mode.
(Refer to P22)
SYSTEM MENU
Used to select a
computer
system.
(Refer to P22)
MENU BAR IN VIDEO MODE
MODE MENU
Used to select
the Video input.
(Refer to P29)
18
Press MENU BUTTON while in Computer mode.
AUTO IMAGE MENU PC ADJUST MENU
Used to adjust Fine Used to adjust the
sync, Total dots, parameters to
and Picture Position match with the input
automatically. signal format.
(Refer to P27) (Refer to P24, 25)
IMAGE MENU
Used to adjust the
computer image.
[Fine sync
/ Total dots / White Balance /
Contrast / Brightness /
Gamma]
(Refer to P26)
Press MENU BUTTON while in Video mode.
SYSTEM MENU VIDEO SOURCE MENU
Used to select a Used to select a
color system of the video source among
selected video [
Video, S-Video, and Y,
source.
Pb/Cb, Pr/Cr
(Refer to P30) (Refer to P29)

MENU BAR

SETTING MENU
Used to adjust Volume,
set the Display Menu and
reset Lamp Replacement
Monitor Timer.
(Refer to P32, 33)
POSITION MENU
Used to adjust
the position of
the image.
(Refer to P27)
IMAGE MENU
Used to adjust the
picture image. [ Color /
Tint / White Balance /
Contrast / Brightness/
]
Sharpness / Gamma
(Refer to P31)
SCREEN MENU
Used to set the size
of the image either
Regular or Wide,
]. or to correct the
Keystone distortion.
(Refer to P30)
LANGUAGE MENU
Used to select
the language
used in the
Menu.
(Refer to P33)
SCREEN MENU
Used to adjust the
size of the image or
to correct the
Keystone distortion.
(Refer to P28)
Same function as the
Computer Mode.