Installation; Positioning The Projector; Adjustable Feet - Sanyo PLC-SU50S Owner's Manual

Installation

Projection angle can be adjusted up to 11.8 degrees with the adjustable feet.
1
Lift the front of the projector and pull the feet lock latches on
both sides of the projector.
2
Release the feet lock latches to lock the adjustable feet and
rotate the adjustable feet to adjust the position and tilt.
3 To retract the adjustable feet, lift the front of the projector
and pull and undo the feet lock latches.
Keystone distortion of the projected image can be adjusted
by menu operation. (p20, 38)
CAUTION
Tilt the projector within the adjustable range in order not to shorten
the life of the lamp. Proper angle should be taken. See page 5.
16
100"
82"
33"
200"
150"
166"
124"

Adjustable Feet

300"
247"
Feet Lock Latches