Sanyo PLC-EF31N Owner's Manual page 12

CONNECTING PROJECTOR
INPUT 2
5 BNC INPUT JACKS
Connect component video output (Cr, Y,
Cb or Pr, Y, Pb) from video equipment to
R/Pr, G/Y and B/Pb jacks or connect
computer output [5 BNC Type (Red,
Green, Blue, Horiz. Sync and Vert.
Sync.)] from computer to R/Pr, G/Y,
B/Pb, H/HV and V jacks. (Refer to P14,
15)
RESET
INPUT 3
AV INPUT (VIDEO/Y, C) JACKS
Connect composite video output from
video equipment to VIDEO/Y jack or
connect Separate Y/C video outputs to
VIDEO/Y and C jacks. (Refer to P15.)
12
INPUT/OUTPUT TERMINALS AND JACKS
INPUT 1
DVI INPUT TERMINAL
Connect computer output
(Digital/Analog DVI-I type) to
this terminal.
(Refer to P14.)
DVI
R/Pr G/Y B/Pb H/HV
S-VIDEO
C
VIDEO/Y
SERIAL PORT OUT
SERIAL PORT IN
R/C JACK
AUDIO
CONTROL PORT
R L
(MONO)
AUDIO CONTROL PORT
V
R L
(MONO)
AUDIO
R
L
(MONO)
AUDIO OUT
USB
R L
(MONO)
INPUT 1, 2, 3
AUDIO INPUT JACKS
Connect an audio output
from computer or video
equipment to these jacks.
(Refer to P14, 15.)
INPUT 1, 2
CONTROL PORT CONNECTORS
When controlling computer
with Remote Control of this
projector, connect mouse port
of your personal computer to
these connectors.
(Refer to P14.)
INPUT 3
S-VIDEO INPUT JACK
Connect S-VIDEO output from
video equipment to this jack.
(Refer to P15.)