Sanyo PDG-DXL100 Owner's Manual page 11

Introduction
To quick change
remote control code,
press "MENU" and
"IMAGE" buttons
about 10 seconds at the
same time.
10
English
5 MENU
6 IMAGE
7 INPUT
8 D.ZOOM -
9 KEYSTONE
+/-
10 LAMP CON-
TROL
11 AV-MUTE
12 COMPUTER 1
13 COMPUTER 2
14 FREEZE
15 Four
Directional
Select Keys
16 ASPECT
17 D.ZOOM +
18 INFORMA-
TION
Press "MENU" to launch the On-
screen display (OSD), back to the top
level of OSD for the OSD main menu
operation
Select the Image mode from Presenta-
tion, Movie, sRGB, Bright and User.
Press "INPUT" to choose RGB,
SCART, Component, S-Video, Com-
posite and HDMI sources.
Zoom out the projector display.
Adjust the image to compensate for
distortion caused by tilting the projec-
tor.
Select the lamp mode.
Mode" function
)
Momentarily turn off/on the audio
and video.
Press "COMPUTER 1" to choose
Computer in 1/Component in 1 con-
nector.
Press "COMPUTER 2" to choose
Computer in 2/Component in 2 con-
nector.
Pause the screen image. Press again to
resume the screen image.
Use
or or or
make adjustments to your selection.
Display the "Aspect Ratio" section of
the on-screen display menu to select
the desired aspect ratio.
Zoom in the projector display.
Display information menu.
"ECO
(refer
to select items or