Related Manuals for Cannon Tools NEILSEN CT4887
Summary of Contents for Cannon Tools NEILSEN CT4887
- Page 1 AIR POWERED CV BOOT INSTALLATION TOOL CT4887 INSTRUCTIONS Cannon Tools Limited 20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K. Address: SAVE THESE INSTRUCTIONS AND PRECAUTIONS.
-
Page 3: Ec Declaration Of Conformity
EC DECLARATION OF CONFORMITY We CANNON TOOLS LTD 20 Station road, Rowley Regis, West Midlands,B65 0JU.U.K. Declare that the following machine complies with the appropriate basic safety and health requirements of the EC Directive based on its design and type, as brought into circulation by us. -
Page 4: Specifications
SPECIFICATIONS Working pressure: 72-130Psi Dimensions: 460 x 140 x 140mm Maximum joint diameter 120mm The CV boot installation tool is to be used solely for the stretching of flexible CV boots onto drive-shaft assemblies of automotive vehicles. SAFETY FIRST Read the operating and safety instructions. Follow them carefully. Maximum safe operating pressure 130 psi. -
Page 5: Operation
OPERATION 1. Slide boot onto arms, large end first. The arms should just protrude from the small end of the boot. To fit a boot to an inner joint, turn the boot inside out before sliding it onto the CV boot installation tool’s arms. - Page 6 SYMBOLS In this manual and/or on the machine the following symbols are used: Denotes risk of personal injury, loss of life or damage to the tool in case of non-observance of the instructions in this manual. Wear hearing protection. Wear safety goggles. Contact with or inhalation of dust coming free during use (e.g.
- Page 9 CANNON TOOLS LTD Add: 20 station road, Rowley Regis, west midlands,B65 0JU.U.K. Made in China...
Need help?
Do you have a question about the NEILSEN CT4887 and is the answer not in the manual?
Questions and answers