Table of Contents
Advertisement
11
Whale 2200A User Manual
2.5 Room Temperature Sensor Installation
Room temperature sensor
is installed on the wall,
away from sources of heat
and direct sunlight, at a
height of about 4-5 feet
from the floor. This will
ensure the best
temperature reading.
Avoid installing the sensor
on perimeter walls of the
vehicle.
Drill a 10mm (3/8") hole to install the sensor.
When in air heater mode, the
dial controls the temperature
setpoint in range of +5C~35C.
Figure7: Room Sensor
Figure8: Unit controller
1) Control knob; 2) Cooking mode button;
3) Cooking indicator (red);
4) Air heater indicator (yellow);
5) Air heating mode button;
6) Ventilation mode;
7) Ventilation indicator (green)
Advertisement
Table of Contents
