Advertisement
fig.6
5.4.
ATTACHING THE VICE
5.4.1.
Securely hold the vice (fig 9 - K) and introduce the three protruding shafts into the corresponding holes in the front of the work
bench.
5.4.2.
Rotate the vice handle clockwise (central shaft) until the thread engages with the threaded casting situated on inside face of the
work bench (fig 9 - K). Continue rotating the handle clockwise until the vice is closed.
5.4.3.
Repeat for the other vice, located on the right hand side of the work bench.
5.4.4.
To open the vice turn the handle anti-clockwise.
WARNING! Be aware that the vice will disengage from the work bench if the vice handle is rotated anti-clockwise too far.
‰
6. BENCH CONFIGUREATION
6.1.
The features of the work bench can be utilised to safely and firmly grip a workpiece in a varied number of ways.
6.1.1.
Smaller workpieces can be held in either vice (fig 10 - 1) or (fig 11 - 4).
6.1.2.
Larger workpieces (fig 10 - 2) can be held on the top surface of work bench using the metal stops (fig 10 - L) inserted into suitable
holes in the work bench top surface.
6.1.3.
Larger sheet workpieces can be held using the front vice (fig 11 - 3) and a wooden stop (fig 11 - M) inserted into a suitable hole in
the right hand leg support.
6.1.4.
Longer workpieces can be held at an angle using the front vice (fig 12 - 5) and a wooden stop (fig 12 - M) inserted into a suitable
hole in the right hand leg support.
6.1.5.
Irregular shaped workpieces (fig 12 - 6) can be held on the top surface of work bench using the metal stops (fig 10 - L) inserted into
suitable holes in the work bench top surface and the vice, which can also be rotated to suit.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call
our technical team on technical@sealey.co.uk or 01284 757505.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
fig.9
fig.11
01284 703534
sales@sealey.co.uk
Original Language Version
fig.7
www.sealey.co.uk
AP1520.V2 Issue 1 23/04/21
fig.8
fig.10
fig.12
Advertisement
