Related Manuals for KC 13.030
Summary of Contents for KC 13.030
- Page 1 Kajak Sediment Sampler Model 13.030 Manual Denmark A/S Research Equipment Limnology Oceanography Hydrobiology ⚫ ⚫...
- Page 2 Do not use alcohol for cleaning acrylic parts KC Denmark A/S is not, and cannot be held, responsible for any damage(s) made to equipment or to operators who ignore safety precautions or because of misuse or wrong operation.
- Page 3 Stainless steel tubes have an eye for attaching a safety line to the Kajak. Quick lock IMPORTANT Smear the rubber bung with a thin layer of silicone grease before use. 13.030 – Kajak Sediment Sampler – Ver. 2.15 - Manual...
- Page 4 Taking samples in a hard seabed demands a carver to protect the sample tube. Mount the carver by turning clockwise and secure. You will need tubes with threaded end to mount the carver. 13.030 – Kajak Sediment Sampler – Ver. 2.15 - Manual...
- Page 5 Check regularly that the nut does not come loose, so the steel bar may fall off. 13.030 – Kajak Sediment Sampler – Ver. 2.15 - Manual...
- Page 6 Insert the adapter into the Kajak body as per item 1. Turn the handle clockwise to secure the adapter in the Kajak. Insert the 80 mm tube into the adapter and secure it by turning the handle in clockwise position. 13.030 – Kajak Sediment Sampler – Ver. 2.15 - Manual...
- Page 7 The poles are made of AISI 316 stainless steel tubes, each 2,0 m. They can be assembled to a maximum length of 6,0 m. 13.030 – Kajak Sediment Sampler – Ver. 2.15 - Manual...
-
Page 8: Storing And Maintenance
Fluorinert, etc., and a long exposure to direct sunlight or lack of clean up for salt water might affect the durability and stability of the products and will remain uncovered by the warranty. 13.030 – Kajak Sediment Sampler – Ver. 2.15 - Manual... -
Page 9: Safety Regulations
Safety Regulations KC Denmark A/S is not, and cannot be held, responsible for any damage(s) made to equipment or to operators who ignore safety precautions or because of misuse or wrong operation. An expert maintenance technician fully familiar with the attendant hazards must only do all maintenance, inspection and repairs.
Need help?
Do you have a question about the 13.030 and is the answer not in the manual?
Questions and answers