Accessory - ABB Slimline XRG2/3 Series Installation Instructions Manual

SWITC H
D ISCO NNEC TO R FUSE,
XRG2/3
—

Accessory

Xr23 Double handle
1. Remove the frontcover from the switches.
3. Rotate the upper part of the handles away from
the bottom part.
Press the release handle, and pull the handle
down to remove the out handle.
4. Attach straps to the handle, and slide in
the new double handle on the two frontcovers
simultaneously and reverse the procedure.
5. Fix the three screws on each handle and
assemble the frontcover back on the switches.
Cut the straps, and operate the handles with
two hands.
2. Unscrew the three screws on
the bottom of each handle.
25