ADJustinG tHE FREEzER DRAwER LEVEL
1. Locate the height-adjuster (
Unscrew the 8 Phillips screws (
2. Loosen the controller screw(
3. Find the best level to align the door slope.
After adjustment, tighten the controller screw (
Adjustment part
) in the freezer drawer.
1
) slightly to loosen the door.
2
1
2
) with a Phillips screwdriver(+).
3
Example) The slope is about 2mm (0.08inch) as shown below.
- Rotate the height adjuster to -2.0 to reduce the door slope.
Reference
Slope
plane
) and then philips screws.
3
Freezer Drawer
3
Setting Up _17