Use Your Headphones; Connect The Headphones To Your Bluetooth Device; Wired Connection; Multi-Point Connection - Philips 8000 Series User Manual

4 Use your
headphones
Connect the headphones
to your Bluetooth device
1
Turn on your mobile phone/
Bluetooth device.
2
Press and hold the on/off button to
turn the headphones on.
The white LED will turn on in
2 seconds
The headphones are reconnected
to the last connected mobile
phone/Bluetooth device and the
dongle automatically
Tip
 If you turn on the mobile phone/Bluetooth
device or activate the Bluetooth feature after
turning on the headphones, you have to
reconnect the headphones and mobile
phone/Bluetooth device manually.
Note
 If the headphones fail to connect to last
connected Bluetooth device within range in
20 senconds, it will change to connectable
mode, then will switch off automatically if it's
still not connected to any Bluetooth device
5 minutes later.
6 EN

Wired connection

You can also use the headphones with
the audio cable provided. Connect the
supplied audio cable to the headphones
and external audio device.

Multi-point connection

Pairing
• Pairing the headphones to two
devices, e.g. mobile phone and
notebook
Switch between devices
• Music can only be played from one
device at a time. Your second device
will be reserved for phone calls
• Pause the audio from one device to
start playing audio from your other
device
Note
• Receiving a call on device two will pause
playback on device one. The call will be routed
automatically to your headphones.
• Ending the call will resume playback from
device one automatically.