Page 2
LK Minipress Basic V3-15kN MAP215CFM For US and Canada only FCC ID: RFRMS42 • IC: 4957A-MS42 Model: CFM optional: This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt standard(s). Operation is subject to the following two conditions: (1) this Auf dem Knapp 46 BL1840 (RAL40) device may not cause harmful interference, and (2) this...
Page 3
LK Minipress Basic V3-15kN MAP215CFM WARNING Read all safety warnings, instructions, illustrations and specifi cations provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fi re and/or serious injury. Save all warnings and instructions for future reference. Läs alla säkerhetsvarningar, instruktioner, illustrationer och specifi...
Page 4
15 kN 18 V • • • • LK Systems AB • www.lksystems.se For use only with Klauke RALK18xx and Makita BL18xx battery series For use only with 18 V Makita battery 30% max. 30% max. 30% max. Abb. ähnlich / pic. similar...
Page 6
LK Minipress Basic V3-15kN MAP215CFM Attention Please follow the general installation/mapping instructions as well as the operation and Service instructions of the company Gustav Klauke including the respective written notes on the application range as well as installation and mapping instructions of the system supplier. Please observe the current generally accepted technical rules as well as all applicable laws and directives for the intended installation/mapping.
Page 12
LK Minipress Basic V3-15kN MAP215CFM SAFETY 3 years or 10.000 operations 3 år eller 10 000 cykler ® 3 år eller 10 000 sykluser 3 vuotta tai 10 000 jaksoa 3 år eller 10.000 cykler ® ® WEEE 2012/19/EU Presswerkzeuge und Zubehör für die Sanitär- und Heizungsinstallation Klauke-WEEE-Abholung@Emerson.com...
Page 13
LK Minipress Basic V3-15kN MAP215CFM ® DC18RC (BL1840) 36 min. RAL40 (BL1815) 15 min. RAL1 Li-ion & Ni-MH 7.2-18V 10 - 40°C All manuals are also available on www.Klauke.com / Alla manualer fi nns tillgängliga på Li-ion ® www.Klauke.com / Alle håndbøker fi nnes også på www.Klauke.com / Kaikki oppaat ovat saatavilla #884676B996 myös osoitteesta www.Klauke.com / Alle manualer fi...
Page 14
LK Minipress Basic V3-15kN MAP215CFM When/Milloin/Mikor/Når Why/Miksi/Miért/Hvorfor After working cycle Efter pressprocess 20 sec Työskentelyn jälkeen Etter arbeidsprosessen Efter afslutning af arbejdet After working cycle Efter pressprocess 20 sec/2Hz Työskentelyn jälkeen Etter arbeidsprosessen Efter afslutning af arbejdet While exceeding the temp. limit Unit too hot 20 sec/5Hz När temperatur överskrids...
Page 15
LK Minipress Basic V3-15kN MAP215CFM When/Milloin/Mikor/Når Why/Miksi/Miért/Hvorfor After working cycle Error: the required pressure has not been reached. The operator has interrupted the pressing cycle manually while the motor was Efter pressprocess not running. Työskentelyn jälkeen Rätt oljetryck har ej uppnåtts eller har återgångsknappen tryckts in Etter arbeidsprosessen innan pressningen är slutförd.
Page 16
Handgeführtes batteriebetriebenes Elektrowerkzeug Typ LK Minipress Basic V3-15kN MAP215CFM (D) CE-´21 - Konformitätserklärung. Wir erklären in alleiniger Verantwortlichkeit, daß dieses Produkt mit den fol- (N) CE-´21 - Konformitetserklæring. Vi erklærer på eget ansvarlighet at dette produkt er i overensstemmelse genden Normen oder normativen Dokumenten übereinstimmt: EN 62841-1, EN ISO 12100, EN ISO 13857, med følgende standarder eller standard-dokumenter: EN 62841-1, EN ISO 12100, EN ISO 13857, EN 28662-1, EN 28662-1, EN 61000-6-3, EN 61000-6-2, EN 60529, EN 1037 gemäß...