Advertisement
▒ Confirmation mode of Output Capacity & Setting Value
※PorF='0' when setting P
(Proportional Control)
•Output Capacity (%)
Flickering Display for 1 sec
▒ Setting mode
Cooling Control
1 ℃분해능
※ SV : Setting Value
Dimension and panel cutout
키를 3초이상 누른다
Dimension
●
77
77
현재온도
ED6
Panel cutout
●
All manuals and user guides at all-guides.com
Present
Temperature
•Setting Value (SV)
Flickering Display for 1 sec
Present
Temperature
Present
Temperature
(Press for more than 3 sec)
0. Control Method Setting
Default SV display
Heating Control
※Default : Heat
•Save SV
1.Deviation Setting
•Deviation Setting
A: 1 ~ 50 ℃
B: 1.0 ~ 50.0 ℃
※Default : 2.0 ℃
•Save SV
2.Delay Time Setting
•Setting Range: 0~ 240 sec
※Default : 1 sec.
•Save SV
3.Input Compensation
A: -30 ~ 30℃
B: -30 ~ 30.0℃
※Compensating for
Sensor Line Length
or error occurrance
※Default : 0.0 ℃
•Save SV
6.5
6.5
60.5
ED6
※ When operating Proportional Control, display Present Output
Capacity (0 ~ 100 %).
- In case of occurring Offset, eliminate M.R value by decreasing as
referring Present Output Capacity.
● Heating Control MODE
PV < SV: Increase M.R value
PV > SV: Decrease M.R value
※ PV : Present Value
SV : Setting Value
M.R : Offset Elimination
Alarm Setting
Menu
7.Alarm Temperature Setting
A: -100 ~ 400 ℃
B: -100.0 ~ 400.0 ℃
※Default : Pt100(400.0 ℃)
CA(999.9 ℃)
1 ~ 5 V DC (5000)
•Save SV
8.Deviation Setting for Alarm
A: 1 ~ 50 ℃
B: 1.0 ~ 50.0 ℃
※Default : 2.0 ℃
•Save SV
9.Delay Time Setting for Alarm
•Setting Range
: 0 ~ 240 sec.
※Default : 1 sec.
•Save SV
※ A : 1℃ Display Mode(trSL=1)
※Only it can be used when PorF=1 (ON/OFF Control)
B : 0.1℃ Display Mode (trSL=0)
Part name
Unit : mm
60.5
10
10
판넬 가공 치수
Connection
6
● Cooling Control MODE
PV > SV: Increase M.R value
PV < SV: Decrease M.R value
4.High Limit of Setting Range
Ex) Pt100
A: -100 ℃ ~ TSH(High Limit)
B: -100.0 ℃ ~ TSH(High Limit)
※Default : Pt100(400.0 ℃)
CA(999.9 ℃)
1 ~ 5 V DC (5000)
•Save SV
5.Low Limit of Setting Range
Ex) Pt100
A: TSL(Low Limit) ~ -400 ℃(TSH)
B: TSL(Low Limit) ~ -400.0 ℃(TSH)
※Default : Pt100(-100.0 ℃)
CA(-80.0 ℃)
1 ~ 5 V DC (-1000)
•Save SV
6.Auxiliary Output Selection
※Default : 0
Timer Setting
Menu
7.ON Time Setting
•Setting Range: 0 ~ 999 minute
※Default : 1 minute
•Save SV
8.OFF Time Setting
•Setting Range: 0 ~ 999 minute
※Default : 3 minute
•Save SV
9.Main Output Control
0: Output Control Cancellation
1: Output Control
•Save SV
Main output indicate
Aux.
71
71
0.5
0.5
0
0
판넬 가공 치수
Setting
Decvease
Present
Temperature
•Function Selection
Temperature Setting (SV)
※Default : 25 ℃
Present
Temperature
output indicate
ED6
Increase
Advertisement
