Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Total TRHLI2201
Summary of Contents for Total TRHLI2201
- Page 1 SDS PLUS HAMMER...
-
Page 2: Security Instructions
Security instructions Caution Read all safety warnings and all instructions. Failure to follow all warnings and instructions may result in electrical shock, fire, and/or serious injury. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. - Page 3 4) Use and care of battery tools Recharge the battery only with the charger specified by the manufacturer. An unsuitable charger can create a fire hazard. Use power tools only with specifically designated batteries. Use of other batteries may create a risk of injury or fire. When the batteries are not in use, keep it away from other metal objects, such as paper clips, coins, keys, nails, screws, or other small metal objects, that can make a connection from one terminal to another.
-
Page 4: Additional Security Warnings
Additional security warnings Additional safety rules for hammer Wear ear protectors. Exposure to noise can cause hearing loss. • Use auxiliary handles, if supplied with the tool. Loss of control can cause personal • injury. • Hold power tool by insulated gripping surfaces when performing an operation where the cutting accessory may contact hidden wiring or its own cord. -
Page 5: Other Risks
Do not remove the battery pack from its original packaging until you need it for • use. Look at the plus (+) and minus (–) marks on the battery and make sure you use • them correctly. Other risks Even when the power tool is used as prescribed, it is not possible to eliminate all residual risk factors: a. -
Page 6: Product Description
Note: Not all accessories illustrated or described need to be included in the standard delivery. Set up Before using Battery charge Total's battery pack charger matches the lithium-ion battery installed in the • machine. Do not use any other battery charger. - Page 7 The lithium-ion battery pack is protected against deep discharge. When the • battery pack is empty, the machine is switched off by a protection circuit: the chuck no longer rotates. • In a hot environment or after heavy use, the battery may become too hot to allow charging.
- Page 8 To lock the switch trigger, place the direction of rotation control (6) in the center position. Forward and reverse rotation control (See Fig. C) forward rotation: Push the rotation control back and forth to the left • to drill. reverse rotation: Push the rotation control back and forth to the right •...
-
Page 9: Troubleshooting And Maintenance
Temperature dependent overload protection. When used as intended, the power tool cannot be subjected to overload. When the load is too high or the permissible battery temperature of 75°C is exceeded, the electronic control turns off the power tool until the temperature is back in the optimum temperature range. -
Page 10: Exploded View
Heavy duty conditions, such as large screws into hardwood, will consume battery pack power faster than lighter duty conditions. Do not recharge your battery below 0ºC above 30ºC as this will affect performance. Environment Do not dispose of electrical appliances as unsorted municipal waste, use •... - Page 11 SDS PLUS HAMMER...
Need help?
Do you have a question about the TRHLI2201 and is the answer not in the manual?
Questions and answers