Advertisement
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to
always take some basic safety precautions when using this product. Please read this operating manual
carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
Description
This 234-piece kit features a low weight, perfect handling, and versatile use. The plastic box not only
houses the shaft, but also other accessories such as various grinding wheels, abrasive sleeves, marking
pins, drills, polishing attachments, all of them being indispensable for model construction, hobby, or
domestic use and well-suited for wood, metal, plastics, and stone.
Safety instructions
ATTENTION:
•
The use of this device is only allowed with a fault current protection switch with a triggering
nominal current up to 30 mA (according to VDE 0100 Article 702 and 738).
•
The device is not intended for use by persons (including children) with impaired or limited phys-
ical, sensory, and mental abilities or lack of experience and/or real knowledge, unless they are
supervised by a person responsible for their safety or follow the instructions made by this person
on how to correctly use the device.
•
Children should be supervised to ensure that they do not play with the device.
•
Perform a visual inspection of the device before every use. Do not use the device if the safety
appliances are damaged or worn out. Never override safety regulations.
•
Only use the device accordingly to the intended purpose stated in this manual.
•
You are responsible for the safety of the working zone.
•
If the cable or plug is damaged due to external influences, the cable must not be repaired, but
must be replaced with a new one.
•
The voltage of 230 V AC indicated on the nameplate of the device must match the existent
mains voltage.
•
Never lift, carry, or fix the device by using the power cable.
•
Make sure that the electric plug connections are protected from flood and humidity.
•
Before working on the device (maintaining, repairing, cleaning it), pull out the plug.
•
Avoid exposing the device to rain or direct jets of water or to operate it in a wet zone.
•
The user is responsible for complying with local safety and mounting regulations. If you have
any question, contact an expert.
•
In case of device failure, repairs can only be carried out by an electrician.
•
Avoid body contact with earthed surfaces such as pipes, stoves, etc. during work.
•
The rotation of the device might generate a light static electricity that could provoke an electric
shock comparable to the one produced when getting off a car.
•
Keep your working area clean and well illuminated.
•
Do not apply excessive pressure onto the workpiece with the device, as the grinder already
removes material from the surface when it is in simple contact with the piece.
•
Never pull out the plug by pulling the cable.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 30297
Page 3
01
2022-1
Advertisement
