Inserting And Removing An Sd Memory Card - Casio Celviano AP-500 User Manual

Using an SD Memory Card
• Never insert anything besides an SD memory card into
the SD memory card slot. Doing so creates the risk of
malfunction.
• Inserting an SD memory card that carries an electrostatic
charge into the SD memory card slot can cause
malfunction of the digital piano. If this happens, turn the
digital piano off and then back on again.
• An SD memory card can become quite warm after very
long use in the SD memory card slot. This is normal and
does not indicate malfunction.
• An SD memory card has a limited service life. After very
long use, you may start to experience problems with
storing data to, or reading or deleting data from the
memory card. When this happens, you need to purchase
a new SD memory card.
* Note that CASIO COMPUTER CO., LTD. shall not be
held liable for any loss of data stored on an SD memory
card.
Using an SD Memory Card with the Digital
Piano
When using an SD Memory card, first be sure to format
the memory card on the digital piano. For details, see
"Formatting an SD Memory Card" on page E-38.
E-34
Inserting and Removing an SD
Memory Card
IMPORTANT!
• Note that the SD memory card must be oriented correctly
when you insert it into the SD memory card slot. Trying to
force the memory card into the slot can damage the card
and the slot.
• Never remove the SD memory card from the card slot or
turn off the digital piano while any data access operation
(save, recall, format) is being performed. Doing so can
corrupt the data on the memory card and damage the SD
memory card slot.
■ To insert an SD memory card
1.
With the SD memory card facing upwards as
shown in the illustration, angle the card
downwards as you insert it into the SD
memory card slot.
• Push the card into the slot until you hear it click into
place.
■ To remove an SD memory card
IMPORTANT!
• Before removing the SD memory card, check to make
sure that the lamp above the CARD button is not lit. If the
lamp is lit or flashing, it means that the card is being
accessed, and that you should not remove it.
1.
Press the memory card into the slot slightly
and then release it.
• This will cause the memory card to disengage and
eject partially.
2.
Pull the memory card out of the slot.
Front