Usb Mode And Midi Mode - Casio Celviano AP-500 User Manual

2.
Use a commercially available USB cable (A-B
type) to connect the digital piano to the
computer.
IMPORTANT!
• Make sure that the digital piano is turned off before
connecting or disconnecting the USB cable to it.
Computer
USB port
USB connector
Digital piano USB port
*1 You need to have Adobe Reader or Acrobat Reader
installed on your computer in order to view the
contents of the "CASIO USB MIDI Driver User's
Guide" (manual_e.pdf). If your computer does not
have Adobe Reader or Acrobat Reader installed
already, use the procedure below to install it.
To install Adobe Reader (Acrobat Reader
1.
Place the CD-ROM that comes with the
digital piano into your computer's CD-ROM
drive.
2.
On the CD-ROM, navigate to the "Adobe"/
"English" folder and double-click
"ar601enu.exe" (or "ar505enu.exe
the instructions that appear on your computer
screen to install the driver.
*2 Adobe Reader cannot be installed using the
"ar601enu.exe" file on a computer running
Windows 98. If your computer is running
Windows 98, click "ar505enu.exe" to install
Acrobat Reader.
USB cable
(A-B type)
*2
)
*2
"). Follow
Minimum Computer System Requirements
Supported Operating Systems
Windows XP Professional, Windows
®
Edition, Windows 2000 Professional, Windows
®
Windows 98SE, Windows
®
Driver Minimum Computer System
Requirements
The following are the minimum computer system
requirements for running the USB MIDI driver.
Universal
• IBM AT or compatible computer
• USB port that provides normal operation under
Windows
• CD-ROM drive (for installation)
• At least 2MB of free hard disk space (not including
space required for Acrobat Reader)
Windows XP
• Pentium 300MHz or higher
• 128MB minimum memory
Windows 2000
• Pentium 166MHz or higher
• 64MB minimum memory
Windows Me, Windows 98SE, Windows 98
• Pentium 166MHz or higher
• 32MB minimum memory

USB Mode and MIDI Mode

Your digital piano has two data communication
modes: a USB mode and a MIDI mode.
The digital piano will enter the USB mode
automatically whenever a connection is established
between it and the USB driver running on a connected
computer. If there is no computer connected to the USB
port, the digital piano will enter the MIDI mode.
USB Mode
The above indicator appears for about three seconds
after a USB connection is established. For details about
using the MIDI device functions in the USB mode, see
the "CASIO USB MIDI Driver User's Guide"
(manual_e.pdf) on the bundled CD-ROM.
Connecting to a Computer
XP Home
®
Me,
®
98
®
USB enabled
E-31