Samsung BN68-03153A-01 User Manual page 19

3D
This exciting new feature enables you to view
3D content. In order to fully enjoy this feature,
you must purchase a pair of Samsung 3D
Active Glasses (SSG-2100AB, SSG-2200AR,
SSG-2200KR) to view 3D video.
Samsung 3D Active Glasses are sold
separately. For more detailed purchasing
information, contact the retailer where you purchased this TV.
3D emitter
✎
If there is any obstacle between the emitter and 3D
Active Glasses, the proper 3D effect may not be
obtained.
■ 3D Mode: Select the 3D input format.
✎
If you want to feel the 3D effect fully, please wear
the 3D Active Glasses first, and then select 3D
Mode from the list below that provides the best
3d viewing experience.
✎
When watching 3D images, turn on 3D Active
Glasses.
3D Mode Operation
Turns the 3D function off.
Off
2D → 3D Changes a 2D image to 3D.
Displays two images next to
Side by Side
each other.
Displays one image above
Top & Bottom
another.
Displays the images for the left
Line by Line
and right eye alternately in rows.
Displays the images for the
Vertical Stripe left and right eye alternately in
columns.
Displays the images for the
Checker
left and right eye alternately in
Board
pixels.
Displays the images for the
Frame
left and right eye alternately in
Sequential
frames.
✎
"Side by Side" and "Top & Bottom" are available
when the resolution is 720p, 1080i and 1080p in
DTV, HDMI and USB mode or when set to PC
and the PC is connected through an HDMI/DVI
cable.
✎
"Vertical Strip", "Line by Line" and "Checker
Board" are available when the resolution is set to
PC and the PC is connected through an HDMI/
DVI cable.
✎
"Frame Sequential" displays the frequency (60Hz
only) when the resolution is set to PC.
■ 3D → 2D (Off / On): Displays the image for the left eye
only.
✎
This function is deactivated when 3D Mode set to
"2D → 3D" or Off.
■ 3D View point: The overall adjustment of 3D
perspective.
✎
This function is deactivated when 3D Mode set to
"2D → 3D" or Off.
■ Depth: Adjusts focus / depth in "2D → 3D" mode.
✎
This function is only activated when the 3D Mode
is "2D → 3D".
■ Picture Correction: Adjusts the images for the left and
right eye.
■ 3D Auto View (Off / On): If 3D Auto View is set to On,
a "Side-by-Side" format HDMI signal with one of the
resolutions below is automatically switched to 3D. Here,
correct 3D information must be sent from the Standard
HDMI 3D Format.
✎
If a 3D failure occurs due to a 3D information error,
set 3D Auto View to Off and manually select a
3D Mode using the
menu.
✎
Support resolution (16:9 only)
Resolution
1280 x 720p
1920 x 1080i
1920 x 1080p
■ 3D Optimize: The overall adjustment of 3D effect.
3D button or corresponding
Frequency (Hz)
60 Hz
60 Hz
24 / 30 / 60 Hz
19
English