Connection Diagram (Fig.3) - Baxi MANDO SILA RCV 300 Installation Instructions, Functioning And Maintenance

ENGLISH
Key and display backlighting remains active for about two minutes after the last key
is pressed. When backlighting is off, you can switch it back on again without
activating any function by pressing any key.
NOTE:
Further details and features are described in the paragraph "Operation
and use" in the target product Instructions Manual.
3. Connection diagrams (fig. 3)
CAUTION!:
!
Equipment connection must be carried out by professionally
qualified personnel.
CAUTION!:
!
The electrical power line to which the equipment will be connected
must be protected by a suitable differential thermal magnetic switch.
The remote control does not need to be powered to the external power supply but
is wired directly to the target product (via terminal board). Connection via cable is
carried out with a subsurface tube (recessed)
3
1: See the target product manual for connection diagrams.
VCC
A
B
GND
1
23