Contents Of The Assembly And Installation Inst; Ructions; Modifications And Conversions To The Unit; Responsibility Of The Operator - Eaton DualGuard-S ESF30 KV Mounting And Operating Instructions

The electrical distribution board with function maintenance
type DualGuard-S ESF30 is used for the battery-supported
monitoring and power supply for emergency lighting. It may
only be:
- used as intended and
- be used in a safe and proper condition.
used in a safe condition. When handling the products and
for the correct the cable entry, please follow these operating
instructions exactly. Any other use is considered improper.
CEAG Notlichtsysteme is not liable for any damage or con-
sequential damage resulting from this.
2.2 Contents of the assembly and installation
instructions
Every person who is assigned to carry out work on or with
the unit must have read and understood the operating instruc-
tions before starting work on the unit. This also applies if the
person concerned has already worked with such a device
or similar devices or has been trained by the manufacturer.
2.3 Modifications and conversions to the
unit
To avoid hazards and to ensure optimum performance, no mo-
difications, additions or conversions may be made to the unit
that have not been expressly approved by the manufacturer..

3 Technical data

DualGuard-S
Type ESF30 SOU5
Certificates
DIBT
Empty enclosure
Fire exposure 30
from outside (min)
Housing data
Housing Fire protection panels
Degree of protection IP54
Protection class II
Dimensions 1228 x 478 x 295
(H x W x D in mm)
Weight (kg) Raw cabinet 103
Closing Swivelling lever with
Double pin
Electrical data
Rated voltage 230 V 50/60 Hz
Number of module slots 5
Max. Cable cross-section 4
End circuits (mm²)
Max. Individual conductor 10
cross-section (mm²)
Max. Total conductor 143
cross-section (mm²)
Mounting and Operating Instructions DualGuard-S ESF30 KV 40071860406 (A) March 2022 www.eaton.com

2.4 Responsibility of the operator

These operating instructions must be kept in the immediate
vicinity of the unit and must be accessible at all times to
persons working on and with the unit. The unit may only be
operated if it is in a technically perfect and operationally safe
condition. The unit must be checked for integrity before each
start-up. The information in the operating instructions must
be followed completely and without restriction!

2.5 Requirements for the personnel

These operating instructions must be read and understood in
the immediate vicinity of the appliance and only authorised
and trained personnel may work with the appliance. The
personnel must have received instruction on any hazards that
may occur. Qualified personnel are those who, on the basis
of their technical training, knowledge and experience as well
as knowledge of the relevant regulations, are able to assess
the work assigned to them and recognise possible dangers.

2.6 Occupational safety

By following the safety information and instructions in this
manual can prevent personal injury and damage during work
with and on the unit can be avoided.
DualGuard-S DualGuard-S
ESF30 SOU4 IO ESF30 SOU3
DIBT DIBT
30 30
Fire protection panels Fire protection panels
IP54 IP54
II II
1228 x 478 x 295 928 x 478 x 295
103 80
Swivelling lever with Swivelling lever with
Double pin Double pin
230 V 50/60 Hz 230 V 50/60 Hz
4 3
4 4
10 10
248 113
DualGuard-S DualGuard-S
ESF30 SOU2 ESF30 SOU1
DIBT DIBT
30 30
Fire protection panels Fire protection panels
IP54 IP54
II II
778 x 478 x 295 628 x 478 x 295
69 60
Swivelling lever with Swivelling lever with
Double pin Double pin
230 V 50/60 Hz 230 V 50/60 Hz
2 1
4 4
10 10
98 83
2 Safety
5