Installation Of The Handle; Charging The Machine - Midea MWD-40P Instruction Manual

Use of Product

Installation of the handle

Insert the end of the handle into the
port of the host vertically to the
bottom position until a click could be
heard. Pull it again to ensure that it
could not be removed and that the
handle is firmly connected to the
machine body. Then the installation
is successful.

Charging the machine

Notes
Charge the product before using it for the first time.
1
Insert the charging end of the
adapter into the rear port of the
charging base and connect the
plug to the power supply.
2
Put the whole machine upright on
the charging base to start charging,
then there will be a voice prompting
"start charging", while the screen
shows the charging power.
3
It will take about 4-6 hours to fully
charge the machine, and the
screen turns off after the battery is
full, while the machine is
automatically powered off.
Insert