Miele WWH 860 Operating Instructions Manual page 85

Covering the holes

Risk of injury from sharp edges!
There is a risk of injury from reaching
into holes that are not covered.
To avoid the risk of injury, the holes
for the transit bars must be covered
after the transit bars have been
removed.
 Press the flaps firmly shut until they
click into place.
Securing the transit bars
 Secure the transit bars to the back of
the washing machine. Make sure that
the top catch is located above the
holder.

Risk of damage from incorrect
transport.
The washing machine may become
damaged if moved without the transit
bars in place.
Keep the transit bars in a safe place.
Fit them again if the machine is to be
moved (e.g. when moving house).
Installation
85