Starting The Programme; Starting A Programme - Miele TWR 780 WP Operating Instructions Manual

5. Starting the programme

Starting a programme

The programme can be started when
the Start/Stop sensor is flashing on and
off.
 Touch the Start/Stop sensor.
The Start/Stop sensor lights up
constantly.
 Status

Time left
Cottons
Drying and the programme duration
remaining will light up in the display.
The laundry is cooled down shortly
before the end of the programme.
Useful tip: In the pull-down menu you
can view the selected drying level or
duration and the energy consumption.
The PerfectDry display will only light up
with programmes with selectable drying
levels:
- Hollow dot  after a programme has
started
The drying level reached will still be
shown later on.
- Solid dot  when the drying level is
reached
measures the residual
PerfectDry
moisture of the laundry. In programmes
with selectable drying levels,
dries the laundry precisely, although the
result is also influenced by the calcium
36
11:02

1:42 h
Machine iron
 PerfectDry
Add laundry
PerfectDry
content of the water.
continually adapts, constantly
increasing the accuracy of the time left.
If you place very few items in the
tumble dryer or load it with dry laundry,
this will be sensed by the empty drum
detection feature. The automatic load
recognition function will restrict the
running time of the selected programme
once it has started and will continue to
dry or air your laundry or textiles in a
gentle manner.
Laundry items and fabrics can wear
out unnecessarily.
Avoid over-drying laundry and
garments.
Energy savings
After 10 minutes, the indicators dim and
the Start/Stop sensor starts flashing.
 Touch the Start/Stop sensor to switch
the indicators on again (this does not
have any effect on a running
programme).
The drum lighting switches off once the
programme has started.
Adding laundry
You can add laundry after the
programme has started.
 Follow the instructions in the sections
"Changing the programme sequence"
and "Adding or removing laundry".
PerfectDry