Subscribe to Our Youtube Channel
Related Manuals for Redexim RTC BRUSH
Summary of Contents for Redexim RTC BRUSH
- Page 1 User manual RTC BRUSH Translation of the original user manual 2204 English 946.120.002 EN Kwekerijweg 8 | 3709JA | Zeist | The Netherlands | T: +31 (0)306 933 227 redexim@redexim.com www.redexim.com...
- Page 2 EU DECLARATION We – Redexim BV, Kwekerijweg 8, 3709 JA Zeist, Holland – declare entirely under our own responsibility that the product: RTC BRUSH to which this declaration refers, complies with stipulation of the 2006/42/EC machine directive and with the norms NEN-EN-ISO 12100:2010, NEN-EN-ISO 13854:2019 Zeist, 24-1-2022 C.H.G.
- Page 3 FOREWORD Congratulations on your RTC Brush purchase. For safe and long-lasting operation of this machine, it is necessary to read and to understand this user manual. It is impossible to work safely with this machine without complete knowledge of the content of the user manual.
-
Page 4: Table Of Contents
TABLE OF CONTENTS SAFETY INSTRUCTIONS......................5 1.1. Obligations of the user ....................5 1.2. Maintenance, repairs and adjustments ..............5 1.3. Using the machine ....................... 6 TECHNICAL DATA ........................6 GENERAL DESCRIPTION......................6 SAFETY STICKERS ........................7 ATTACHING THE BRUSH TO THE RTC TRACTOR ............... 8 PUTTING THE BRUSH INTO OPERATION ................ -
Page 5: Safety Instructions
When unskilled people use, maintain or repair the machine, this could result in injuries to the user and to third parties. This should be avoided! Use only original Redexim parts for maintenance or repairs because of the safety of the machine and of the user. -
Page 6: Using The Machine
520 x 1250 x 254 mm (20.5”x49.2”x 9.9”) Folded: 3. GENERAL DESCRIPTION The RTC brush is a machine for sweeping artificial grass fields or natural grass fields. The machine cannot be used on its own but must be powered by the RTC tractor (separately sold). -
Page 7: Safety Stickers
4. SAFETY STICKERS Safety stickers are located on both sides of the machine. These safety stickers must always be clearly visible and legible and must be replaced if they have become damaged (see Figure 1). Figure 1 In case of maintenance, adjustments and repair, always switch OFF the engine of the towing vehicle. -
Page 8: Attaching The Brush To The Rtc Tractor
5. ATTACHING THE BRUSH TO THE RTC TRACTOR Attaching the RTC Brush on the RTC tractor has to be done carefully. Follow the instructions below: Figure 2 Prior to attaching the machine, check the following points: Check whether the brush is undamaged and whether it is safe to attach and use. - Page 9 4. Secure the connecting rods (1) with the R-clips (6). 5. Take a seat on the RTC tractor and lift the RTC brush with the lifting handle (7) on the RTC tractor and check if the lifting of the RTC brush works well.
-
Page 10: Putting The Brush Into Operation
2. Are there slopes? The maximum slope is 20 degrees for this machine. Always go from top to bottom. 3. Is there danger of objects that distract the attention of the driver? If so, the RTC Brush CANNOT be used. -
Page 11: Start/Stop Procedure
The start procedure is as follows: (see Figure 5) 1. Check the RTC Brush on technical failures and solve these before using the brush. 2. Drive to the spot where the brushing should take place. 3. Stop the RTC tractor on a stable and flat area, shut off the engine and step of the tractor. -
Page 12: Maintenance
8. MAINTENANCE 8.1. Maintenance schedule Time schedule Check point Work activities Before every use Loose parts, bolts and nuts Tighten loose bolts / nuts. Safety stickers Presence and readability of the safety stickers Replace these if not present or damaged. Once a week or more Check the pollution of the brush Clean the tangles in the brush.
Need help?
Do you have a question about the RTC BRUSH and is the answer not in the manual?
Questions and answers