Related Manuals for SachsenRad C1 Vintage
Summary of Contents for SachsenRad C1 Vintage
- Page 1 Instruction manual for C1 Vintage Product number: BB12079 CAUTION: READ THE MANUAL BEFORE USING THE E-BIKE.
-
Page 2: Table Of Contents
CONTENTS 1. Safety note 2. General information 3. Assembly instructions 4. Installing the control display 5. Further information and maintenance of the battery 6. Charging procedure 7. Warning 8. Warranty 9. Technical data... -
Page 3: Safety Note
1. Safety note Thank you for choosing our product! Use the e-bike properly to ensure your safety and health. It is important to read the entire manual before assembling and using the device. Safe and effective use can only be ensured if the product is properly assembled, maintained and used. It is your responsibility to ensure that all users of the E-Bike are informed of all warnings and precautions. -
Page 4: General Information
- Please check that all nuts and bolts are tight to avoid injury. - This manual is intended as a general guide for your new e-bike. 1. general information 2. Parts are included in the package: Name Quantity SachsenRad E-Bike Assembly package Instruction manual Charger Battery Pedals... -
Page 6: Assembly Instructions
Assembly instruction Cut off the packing rope. After opening the bike box, remove the electric bike and the accessories inside. 3.1. Mounting the stand 3.1.1. Loosen the 2 screws on the stand. 3.1.2. Mount the stand on the bike. 3.1.3. Tighten the screws with the tool. 3.1.1. - Page 7 3.4. Attaching the front light 3.4.1. Attach the front light to the front fork mount as shown in the illustrations. 3.5. Attach the front wheel 3.5.1. Please note: The front fork guard prevents the fork from deforming during transport. It is part of the packaging material.
- Page 8 3.5.4. Adjust the front brake cable well and be careful not to touch the rim. 3.6 Attach the pedals. 3.6.1 There is a right pedal marked "R" and the left pedal marked "L". 3.6.2 Screw the pedal "R" clockwise to the right crank. Screw the pedal "L" counterclockwise to the left crank.
- Page 9 3.7.2 Tighten the seat with the quick release device. 3.8. adjust the angle of brakes, control display, gear shift, throttle and bell on the handlebar and tighten the screws with the tools. 3.9 Insert the battery. 3.9.1. open the battery packaging. 3.9.2 Push the battery into the holder provided until it clicks into place behind the saddle and then insert the key to lock the battery.
-
Page 11: Installing The Control Display
Installing the control display 4.1. 4.1. Instruction of the control display Mode; Low Mode; Mid Mode; Low Battery Level Reduce Increase On/Off Speed Speed 4.2. Explanation of the control display... -
Page 12: Further Information And Maintenance Of The Battery
4.3 Precautions for commissioning Pay attention to the safety use. Do not attempt to disconnect the plug when charging the battery. Do not change the system settings to avoid a malfunction. 5. Further information and maintenance of the battery ● what is the range of the battery on a full charge? This depends on the load weight, road conditions and battery capacity. -
Page 13: Warning
You need an e-bike, but at the same time you don't want to give up your classic style. You like speed, comfort and the memory of the good old days. Then the SachsenRad C1 Vintage is the perfect bike, which we designed wholeheartedly for you. The sight of the lightweight iron frame will surely take you back to the good old days;... - Page 14 - Color: Black - Frame material: vintage style iron frame - Frame size: 26 inch - Stand: Rear stand - Front bike basket: Elegant and useful - Battery: 36V/10Ah lithium battery - Brushless motor, rear drive - Motor power: 250 W - Speed: 25 km/h - Gear shift: 6 speed - Brakes: V-brake...