Samsung 750 User Manual page 19

✎
"Side by Side" and "Top & Bottom" are available
when the resolution is 720p, 1080i and 1080p in
DTV, HDMI and USB mode or when set to PC
and the PC is connected through an HDMI/DVI
cable.
✎
"Vertical Strip", "Line by Line" and "Checker
Board" are available when the resolution is set to
PC and the PC is connected through an HDMI/
DVI cable.
✎
"Frame Sequential" displays the frequency (60Hz
only) when the resolution is set to PC.
→ 2D (Off / On): Displays the image for the left eye
3D
■
only.
✎
This function is deactivated when
to "2D → 3D" or Off.
3D View point : The overall adjustment of 3D
■
perspective.
✎
This function is deactivated when
to "2D → 3D" or Off.
: Adjusts focus / depth in "2D → 3D" mode.
Depth
■
✎
This function is only activated when the
is "2D → 3D".
: Adjusts the images for the left and
Picture Correction
■
right eye.
3D Auto View (Off / On)
■
a "Side-By-Side" format HDMI signal with one of the
resolutions below is automatically switched to 3D. Here,
correct 3D information must be sent from the Standard
HDMI 3D Format.
✎
If a 3D failure occurs due to a 3D information error,
set 3D Auto View to Off and manually select a 3D
Mode using the 3D(
menu.
✎
Support resolution (16:9 only)
Resolution
1280 x 720p
1920 x 1080i
1920 x 1080p
3D Optimize : The overall adjustment of 3D effect.
■
Resolution supported for HDMI PC mode
The resolution for HDMI PC mode is optimized to 1920 x
1080 input.
An input resolution other than 1920 x 1080 may not be
displayed properly in 3D display or full screen mode.
3D Mode is set
3D Mode is set
3D Mode
: If 3D Auto View is set to On,
) button or corresponding
Frequency (Hz)
60 Hz
60 Hz
24 / 30 / 60 Hz
How to watch the 3D image
3D
To watch in 3D, wear 3D glasses and press the
power button on the glasses.
Watching 3D picture for a long time may cause
eye fatigue and/or dizziness.
OK
U Move E Enter e Exit
3D 3D
Using the LEFT / RIGHT keys on the remote control, Using the LEFT / RIGHT keys on the remote control,
select the icon suitable for the picture on screen. select the icon suitable for the picture on screen.
U Move E Enter e Exit U Move E Enter e Exit
1. Press the button, then the Content View
CONTENT
menu will appear.
2. Press the ◄ or ► button, then select 3D.
To watch in 3D, wear 3D Active Glasses and press the
power button on the glasses.
3. Select OK, then press the
4. Using the ◄ or ► buttons on your remote control,
selects the 3D Mode of the image you want to view.
✎
Some 3D modes may not be available depending
on the format of the image source.
Supported formats and operating specifications for
Standard HDMI 3D
✎
The 3D formats indicated below are recommended by
the HDMI association and must be supported.
Source signal format
1920x1080p@24Hz x 2
1280x720p@60Hz x 2
Cancel
button.
ENTERE
Standard HDMI 1.4 3D
1920x2205p@24Hz
1280x1470p@60Hz
19
English