Fertility Indicators; Past And Future Fertility Display/Prediction; Fever Display; When Not To Take Your Temperature - Valley Electronics LADY-COMP Instructions Manual

Fertility indicators

"Green" illuminated "Yellow" illuminated "Red" illuminated
= learning phase
= infertile = fertile
The device displays your temperature and your fertility for the day; this
data is valid for 24 hours, and accurate from the very first day. The num-
ber of "green" days increases cautiously and systematically, while the
"red" days are narrowed down. The Pearl Index is calculated as 0.7
Past and future fertility display / prediction
"Return" illuminated
Go forward Press "ok"
Go back
= Prediction "Return"
16
"Red" "Yellow" "Red" "Yellow"
"Red" blinking
"Green" blinking = "Green" illuminated =
= ovulation day
probable pregnancy pregnancy confirmed
(99.3%) from the first day on. If the device has not received any input for
a long period of time, or receives information that it cannot evaluate, the
number of "yellow" days increases.
You can view all previous temperatures by repeatedly pressing the key
to the "left" on the temperature display. You can also view a six-day
forecast by repeatedly pressing the "right" key.

Fever display

If your temperature value is above 37.8 °C or 99.9 °F, the temperature display alternates with
the letter "F" for fever. Fever is recorded, however, the fever temperature value is not included
in the fertility calculation.
Temperature symbol Thermometer "Fever" display alternating
and alarm illuminated symbol blinks with temperature value
Pressing the button Place temperature Hold button for 3 sec.
switches alarm off after beginning to
sensor under your
+ starts measurement tongue stop measurement

Cancel temperature measurement

By pressing the "OK" button for 3 seconds the temperature reading will be canceled and
you return to the home screen. The temperature may be taken again while still within the
temperature measuring time period.

When not to take your temperature

Lady-Comp uses its knowledge of your cycle and
available temperature values to calculate the future
cycle course and resulting from this, the fertility.
Increases in temperature due to flu, lack of sleep,
excess alcohol consumption and/or medication
with thermal effects are "abnormal" and will be
recognized by the device as such. Generally, it is
recommended to cancel the daily temperature
"Return" illuminated
measurement in case of a fever, when taking
medication, or after a night of partying, so as not
Press "ok"
to enter too many "abnormal" temperatures into
"Return"
the device.
17