Electrolux EW7W4858OB User Manual page 20

Table of Contents

Advertisement

20
www.electrolux.com
Programme
Default tempera‐
ture
Temperature
range
Aclarado/Enxag.
Limp. Máquina
60 °C
Anti-Alergia
60 °C
Refer‐
Maxi‐
ence spin
mum
speed
load
Spin
speed
range
1600 rpm
8 kg
(1600-
400 rpm)
1200 rpm
(1200 -
400 rpm)
-
1600 rpm
8 kg
(1600 -
400 rpm)
Programme description
(Type of load and level of soiling)
All fabrics, except woollens and very
delicate fabrics. Programme for rinsing
and spinning the laundry. The default spin
speed is the one used for cotton pro‐
grammes. Reduce the spin speed accord‐
ing to the type of laundry. If necessary, set
the Aclarado/Enxague Extra option to add
rinses. With a low spin speed, the appliance
performs delicate rinses and a short spin.
Maintenance cycle with hot water to clean
and freshen the drum and to remove resi‐
due that may cause odour. For the best re‐
sult use this cycle once a month. Before
running this cycle, remove all items from the
drum. In the washing phase compartment of
the detergent dispenser, put the flap of the
compartment in upward position. Pour a
cup of chlorine bleach or a washing ma‐
chine cleaner in the washing phase com‐
partment. DO NOT use both together.
After the drum cleaning, run a
further rinse cycle with empty
drum and no detergent to re‐
move any residue of bleach.
If you set this programme with the Secar,
the appliance performs the anti-fluff action.
Refer to chapter 'Fluff in the fabrics'.
White cotton items. This high-performance
wash program combined with steam va‐
pour, removes more than 99,99% of bacte‐
6)
ria and viruses
keeping the temperature
above 60°C throughout the washing phase;
with an additional action on the fibers
thanks to a vapour phase, an enhanced
rinsing phase ensures a proper removal of
detergent and micro-organism residues.
This program ensures also a proper reduc‐
tion of pollens/allergenic items.

Advertisement

Table of Contents
loading

Table of Contents