Page 1
All products are designed, developed and manufactured by Pan Acoustics in Germany. MADE IN GERMANY Pan Acoustics reserves the right to modify products without prior notice. www.pan-acoustics.de SINCE 2002 Pan Acoustics GmbH │ Schweigerstr. 13d │ D-38302 Wolfenbüttel │ Germany │ Tel.: +49 (0) 5331 900 95 70 │ E-mail: contact@pan-acoustics.de...
Page 2
If the product is resold, the document must be handed over to the new owner in printed or electronic form. Pan Acoustics reserves the right to change / update the document without prior notice. The latest version of this document can be downloaded from the Pan Acoustics website.
P SW-108 | RJ. It is aimed at system technicians and persons assigned the task of installing and operating a relevant system. Pan Acoustics reserves the right to make changes and modifi cations within the scope of legal regula- tions and product improvements without prior notice.
Page 5
The base surface is to be checked for suitability of installation and, where required, prepared by qualifi ed personnel. • the connections and components delivered by Pan Acoustics or expressly mentioned in this manual are to be used. •...
Manual 5. Safety instructions All products from Pan Acoustics are developed and manufactured in Germany according to the latest safety regulations. Each product is thoroughly inspected prior to shipping according to in-house quality guidelines. The device conforms to the current CE regulations for operation in residential, business, commercial and industrial areas.
In case of doubt as to the type and composition of the building structure, consult a structural engineer. CONNECTION OF THE LOUDSPEAKER AND MOUNT • All mounts sourced via Pan Acoustics for the Pan Subwoofer series are delivered with suitable installation material for connection with the loudspeaker. •...
The maximum cable lengths and cable cross sections that may be used are indicated below. Pan Acoustics loudspeakers have a high effi ciency. Due to the high sensitivity of the systems, a con- siderable sound pressure can already be generated from little applied power. The RJ variants of the loudspeakers therefore do not have to be driven to the maximum in order to produce a sound level that is suffi...
The device must also not be exposed to strong vibrations. 10. Service and repair Service and repair work may only be carried out by persons and partners authorised by Pan Acoustics. No service or repair measures are to performed on the device that exceed the statements made in chapter 11 “Maintenance”.
Manual 14. Warranty Pan Acoustics stands by its products and gives up to 10 years warranty on its loudspeakers for any material or manufacturing defects. New products manufactured in accordance with protection classes IP54 and IP65 as well as digital audio interfaces (Dante ) from Audinate Pty Ltd and re- ®...