Step 3:
Orient the Bracket LH (2) and slip-in
the Nut M12 (15)-1 off, and tighten it
to torque as shown in the BOM table.
Copyright By SRC
Design and Specification are subjected to change
Step 4:
Orient the Midle plat (5) and slip-in
the screw M10x120 (9)-1 off, and
nut M10 (14)-1 off, (as show)
And Orient the bracket lower (4)
and slip-in the original screw -2 off,
in motorbike and tighten it to
torque as shown in the BOM table.
(as show)
Page 3