CONTENTS INFLATING & DEFLATING ............INSTALLING FINS ..............THE ACTION MOUNT ..............ADJUSTABLE SUP PADDLE ............TRANSPORTING YOUR BOARD ..........FOLDING & STORAGE ............... CARE & MAINTENANCE ............SAFETY GUIDELINES ..............REPAIRING YOUR BOARD ............WARRANTY INFORMATION ............RELEASE OF LIABILITY ..............
12V battery is a great idea. 42” (3.5”) INFLATION HOSE: The inflation hose is designed specifically to fit all iROCKER and BLACKFIN boards. You’ll simply connect one end of the hose to your board and the other...
Confirm each fin is securely attached before paddling. TO TETHER : Insert the tether-lock into the fin. Turn toward the locked icon until it snaps into position. To release the tether, turn toward the unlocked icon and remove the tether. ULTRA SERIES OWNER’S MANUAL | 4...
THE ACTION MOUNT ATTACHING ACCESSORIES Your board has 3 built-in ACTION MOUNTS with M8 size thread, allowing you to customize your board with a variety of accessories. Be sure to ATTACH YOUR ACCESSORY AFTER INFLATING and remember to REMOVE IT BEFORE DEFLATING. ACCESSORY MOUNT ADJUSTABLE SUP PADDLE IMPORTANT: DO NOT REMOVE SHAFT STYROFOAM...
CLOSED/UP position. IMPORTANT: Avoid standing the rolled board on its side on rough surfaces such as concrete or rocks. This can cause damage to the first layer of the rail. ULTRA SERIES OWNER’S MANUAL | 6...
CARE & MAINTENANCE IMPORTANT : PROLONGED HEAT EXPOSURE Never leave your paddle board exposed to direct sunlight when out of the water. Always store your paddle board in the shade when not in use. If you must expose your board to direct sunlight during transport or temporary storage, it is safest to keep the bottom facing up.
When transporting the board, be sure to avoid sharp objects. Punctures are not covered by warranty. Keep the board clear of any heat-producing items such as camp stoves, gas lamps, etc. Damages resulting from heat are not covered by warranty. ULTRA SERIES OWNER’S MANUAL | 8...
SAFETY FIRST! FOLLOW LOCAL BOATING LAWS IMPORTANT: Remember to check local laws and regulations regarding the safe and proper use of this product. Always paddle with a U.S. Coast Guard approved personal flotation device (PFD). Never go paddle boarding in severe weather or water conditions that might inhibit your ability to steer the board or return to shore safely.
Best practice is to seal the patch to the board using a clamp, leaving the clamp in place for 12-24 hours. Allow repair glue to dry for at least 24 hours before using your paddle board. Always test your board in shallow water after any repair. ULTRA SERIES OWNER’S MANUAL | 10...
See below for warranty submission steps. The buyer is responsible for return shipping for any warranty claim. After inspection of any product found to be defective, iROCKER will either repair or replace the defective part or item as deemed necessary by iROCKER.
DISABILITY AND EVEN DEATH ARISING FROM YOUR PARTICIPATION, INCLUDING THOSE RISKS CAUSED BY ACTIONS OR NEGLIGENCE OF RELEASES AND/OR ANY DESIGN, MANUFACTURING OR ASSEMBLY DEFECTS IN THE PRODUCT. To read the full Release of Liability, visit: www.irockersup.com/release-of-liability ULTRA SERIES OWNER’S MANUAL | 12...
Page 14
Have Questions? We’re here to help. 1-866-985-8367 info@iROCKERSUP.com...
Need help?
Do you have a question about the ULTRA Series and is the answer not in the manual?
Questions and answers