CONTENTS INFLATING & DEFLATING ............INSTALLING FINS ..............SAFETY GUIDELINES ..............FOLDING & STORAGE ............... THE ACTION MOUNT ..............ADJUSTABLE KIDS PADDLE ............TRANSPORTING YOUR BOARD ..........CARE & MAINTENANCE ............REPAIRING YOUR BOARD ............WARRANTY INFORMATION ............RELEASE OF LIABILITY ..............
INFLATING & DEFLATING AIR VALVE CAP CLOSED/UP POSITION OPEN/DOWN POSITION INFLATING YOUR BOARD Generally, the air pump’s pressure gauge will start to register a reading after about 150 pumps (approx. 7 PSI). It should take about 250 pumps to achieve 15 PSI. TO INFLATE: Attach the hose to the air pump.
ALIGNED WITH NOTCH PROPERLY INSERTED CLOSED/DOWN POSITION 2 + 1 FIN CONFIGURATION Your NAUTICAL Kids board comes equipped with three removeable flip-lock nylon fins for added maneuverability and control. TO INSTALL: Make sure the fin box lock is in the OPEN/UP position.
SAFETY FIRST! FOLLOW LOCAL BOATING LAWS IMPORTANT: Remember to check local laws and regulations regarding the safe and proper use of this product. Always paddle with a U.S. Coast Guard approved personal flotation device (PFD). Never go paddleboarding in severe weather or water conditions that might inhibit your ability to steer the board or return to shore safely.
FOLDING & STORING YOUR BOARD FOLDING YOUR BOARD IMPORTANT: Dry the board completely before tightly folding for storage. Excess moisture may cause mildew or mold damage. When folding the board, always start at the nose, making sure the air valve is in the OPEN/DOWN position. Once the board is completely folded, set the air valve to the CLOSED/UP position, then wrap the strap around the rolled board and place it in the bag.
THE ACTION MOUNT ATTACHING ACCESSORIES Your board has a built-in ACTION MOUNT with M8 size thread, allowing you to customize your board with a variety of accessories. Be sure to ATTACH YOUR ACCESSORY AFTER INFLATING and remember to REMOVE IT BEFORE DEFLATING. ACCESSORY MOUNT KIDS SUP PADDLE IMPORTANT: DO NOT REMOVE SHAFT STYROFOAM...
TRANSPORTING YOUR BOARD IMPORTANT: Do not transport your board while inflated. Your board is designed to be compact for convenient storage and travel. Never transport an inflated paddle board on top of a vehicle. Due to lack of weight when inflated, the board will travel poorly if strapped to the roof of a moving vehicle.
CARE & MAINTENANCE IMPORTANT: PROLONGED HEAT EXPOSURE Never leave your paddleboard exposed to direct sunlight when out of the water. Always store your paddleboard in the shade when not in use. If you must expose your board to direct sunlight during transport or temporary storage, it is safest to keep the bottom facing up.
BOARD MAINTENANCE Sun, sand, and saltwater will degrade any manmade material over time. Rinse off sand and saltwater deposits from your paddleboard with fresh water, then wash with soap and water and store in a cool, dry environment after each use. Allow carry handles to dry completely prior to storing for a prolonged period.
See below for warranty submission steps. The buyer is responsible for return shipping for any warranty claim. After inspection of any product found to be defective, iROCKER will either repair or replace the defective part or item as deemed necessary by iROCKER.
RELEASE OF LIABILITY By assembling and using this product (“Product”), you agree that you have read and understand the entire Product owner’s manual and the on-product warnings and labels, including all instructions and warnings contained in these materials, prior to using the Product, and that copies of such warnings, labels and instructions have been made available to you.
Need help?
Do you have a question about the NAUTICAL KIDS and is the answer not in the manual?
Questions and answers