Table of Contents
Advertisement
4.
Turn the select/confirm knob until the desired steeping time is shown on the
numerical display. Turning the control slowly will increase/decrease the time in 1
minute intervals. Turning the control quickly will increase/decrease the time in 5
minute intervals.
5.
Press the select/confirm knob G . The last used temperature will then be displayed.
6. Turn the select/confirm knob to adjust desired temperature (or skip this step if the
current temperature is already correct).
7.
Press the select/confirm knob G to start the countdown.
8. Your kettle will beep when the time is up. Note that the infusion will start to cool
down naturally after the timer has elapsed.
9.
To cancel at any time you can tap the cancel Bicon.
KEEP WARM MODE
This mode allows you to keep the heated water at a specified temperature. The keep
warm mode can be set from 1 to 40 minutes.
1.
Tap the N icon.
2.
Turn the select/confirm knob until the desired keep warm time is shown on the
numerical display. Turning the control slowly will increase/decrease the time in 1
minute intervals. Turning the control quickly will increase/decrease the time in 5
minute intervals.
3.
Press the select/confirm knob G . The last used temperature will then be displayed.
4.
Turn the select/confirm knob to adjust desired temperature (or skip this step if the
current temperature is already correct).
5.
Press the select/confirm knob G to start the countdown.
6. Your kettle will beep when the time is up.
7.
To cancel at any time you can tap the cancel Bicon.
BOIL DRY PROTECTION
If your kettle boils dry, a safety cut-out device will automatically switch it off. If this
happens, unplug your kettle and allow it to cool down until the cut-out resets itself.
Allowing your kettle to boil dry will shorten the life of the element.
CARE AND MAINTENANCE
1.
Unplug the stand, and let the kettle cool before cleaning.
2.
Wipe all surfaces with a clean damp cloth.
3.
Open the lid.
4.
Squeeze the two lugs together on the anti scale filter then remove it from the
kettle.
5.
Rinse it under a running tap while brushing with a soft brush.
6.
Insert the anti scale filter back into the kettle and push it into place until it clicks.
6
Advertisement
Table of Contents
