Advertisement
10. Only use on a flat surface capable of supporting the Hand Truck and its maximum
capacity load of 200 Lbs . It is easy to lose control of the Hand Truck if attempting to pull a
load on a sloping or uneven surface. Always use an assistant when handling heavy loads.
11. Do not allow children to play on, stand upon or climb into the Hand Truck. The Hand
Truck is not for carrying people or animals.
12. Always check hardware and assembled parts after assembling. All connections should be
tight and hardware tightened.
13. Always distribute objects in the Hand Truck evenly. Uneven weight distribution could cause
tipping. Harbor Freight Tools is not responsible for damage to persons or cargo. Do not lean or
climb on the side panels.
14. Be aware of dymanic loading! Suddenly dropping or bouncing a load on the Hand Truck may
create, for a brief instant, an excess load, which may result in damage to the product and/or
personal injury.
15. Be careful with the Stretch Cord. Cords can be dangerous; if they come undone they will act
as a projectile and will cause serious damage. Do not allow children to play with or use the
Stretch Cord.
Warning:
The warnings, cautions, and instructions discussed in this instruction manual cannot
cover all possible conditions and situations that may occur. It must be understood by
the operator that common sense and caution are factors which cannot be built into
this product, but must be supplied by the operator.
When unpacking your Aluminum Folding Hand Truck, check to make sure the following parts
are included. If any parts are missing or broken, please call HARBOR FREIGHT TOOLS
at 1-800-444-3353.
Your Hand Truck comes completely assembled. It is important that you read the entire manual to
become familiar with the product BEFORE you use the Hand Truck. Before operating the Hand
Truck be sure that you have all parts described in the Parts List and Assembly Diagram located on
the last pages of this manual.
1.
To release the Handle (2), press down on the Button (5) located on the bar beneath the
Handle (2)-see Assy Diagram and Figure 1. At the same time, pull up on the Handle (2) and
push down on the Plate (23) with your shoe-see Figure 1.
2.
Set the Handle (2) to the height you desire.
3.
To close the Hand Truck, reverse the above instructions. Press down on the Button (5),
push down on the Handle (2) and pull the Plate (23) up into its closed position-see Figure 2.
SKU 92709
Unpacking
Assembly
To Open and Close
For technical questions please call 1-800-444-3353.
Page 3
Advertisement
