Setting Up The Product - CARAVITA AMALFI Installation And Operating Instruction

4.4

Setting up the product

Preparation
For safety reasons, the parasol should be set up by at least two people.
I
Prepare the mobile base or ground sleeve as instructed by the manufacturer.
I
The mobile base must be sufficiently heavy.
I
Have a step ladder ready.
I
Have the stainless steel screws and the hex key contained in the scope of delivery available.
I
Installing the pole in the base
2 2
1
2
3 3
1
Installing the arm
The pole is installed in the ground sleeve or in the mobile base.
4000256 [v0]/2022-01-01
1 Screw the screw M10x30 into the base (12-15 mm).
2 Set up the pole in a vertical position.
3 Push the eyelet on the stainless steel base into the screw.
4 1 person fastens the 2nd screw M10x30, while the 2nd person holds the
pole.
5 Screw the other screws into the remaining eyelets.
6 Tighten all 4 screws using the hex key.
4 4
The parasol become slightly more stable.
The parasol is sufficiently stable for further installation steps.
Installation
33 | 96