Philips NORELCO 8270XLCC Manual page 8

ENGLISH
14
◗ Do not leave the Jet Clean System with the
razor in it continuously plugged into the
outlet as it would reduce life of batteries. If
storing razor in Jet Clean System, remove the
plug from the outlet as soon as the razor is
fully charged.
◗ Charging or recharging requires one full hour.
◗ A fully charged razor has a shaving time of up
to 55 minutes.
◗ Do not charge razor in a pouch.
◗ Recharge only when the plug symbol on the
display lights up.
◗ Do not charge/recharge or use razor until
fully dried.
Charging Razor with a Cord
C
1 Connect cord directly to razor and
connect the charging plug into any 100V to
240V AC outlet. Use only the charging plug
provided.
◗ An adaptor plug may be necessary for
charging plug usage in some foreign countries.
Use an attachment plug adaptor of the proper
configuration for the power outlet.
The charging plug will automatically convert to
work on 100V to 240V AC systems.
C
◗ As you charge razor, more and more lights of
the display meter will light up to indicate what
level the batteries have been charged.
2 First time charging and recharging after
non-use for 1 month or more requires a
full 4 hours. After initial charge, recharging
requires 1 hour. A fully charged razor has
a cordless shaving time of up to 17 days.
◗ When batteries are fully charged, all the
battery level lights in the display will light up.
A few hours after charging, all lights go out.
Charging Razor with Jet Clean
System
C
1 Connect the small plug to the Jet Clean
System. Connect the charging plug into
any 100V to 240V AC outlet. Use only the
charging plug provided.
The razor holder automatically moves up to the
highest position.
C
2 Remove protective razor head cap from
razor.
C
3
Place the razor head side down in the
razor holder so that the razor head fits
into the configuration shown inside the Jet
Clean System. Gently press the base of the
razor towards the back of the Jet Clean
System so that the razor base fits snugly in
place.
ENGLISH
15