Advertisement
9 Admin Card Operation
9.1 Add Card
Read admin add card , Read the 1
st
user card Read the 2
nd
user card ...,Read admin add card
Note: The admin add card is used to add card users continuously and quickly. When you read the admin add card
at the first time, you will hear short "BEEP-BEEP" and the indicator light turns orange, it means you have entered
into add user programming. When you read the admin add card at the second time, you will hear long "BEEP--"
sound once and the indicator light turns red, it means you have exited the add user programming.
9.2 Delete Card
Read admin delete card , Read the 1
st
user card Read the 2
nd
user card ... , Read admin delete card
Note: The admin delete card is used to delete card users continuously and quickly. When you read the admin
delete card at the first time, you will hear short "BEEP-BEEP" sound twice and the indicator light turns orange, it
means you have entered into delete user programming. When you read the admin delete card at the second time,
you will hear long "BEEP--" sound once, the indicator light turns red, it means you have exited the delete user
programming.
10 Data Backup Operation
Example: Backup the data of machine A to machine B ( Machine A uses admin card of A, machine B uses admin
card of B)
The green wire and white wire of machine A connects with the green wire and white wire of machine B
correspondingly, set B for receiving mode at first, then set A for sending mode, the indicator light turns
green flash during the data backup, data backup is successful when indicator light turns red.
11 Reset to Factory Default/Register admin card
Users can reset to the factory default when the admin code is forgotten, or the default settings has been modified,
operation as below:
Power off, press and hold the exit button continuously, power on, release the exit button immediately when
hearing beep sound twice, the admin code has been reset to 999999, factory default settings are successful.
Power off, press and hold the exit button continuously, power on, release the exit button immediately when
hearing beep sound twice, swipe the first card as for admin add card, swipe the second card as for admin delete
card.
Note: Registered user data won't be deleted when reset to factory default.
Advertisement
