Samsung SyncMaster 959NF User Manual page 66

Troubleshooting
Q&A
1. General Q & A
Question
How can I change the frequency?
How can I adjust the resolution?
How can I set the Power Saving
function?
The monitor makes a sound when it
is turned on.
How can I clean the outer
case/Picture tube?
Frequency can be changed by reconfiguring the video
card.
Note that video card support can vary, depending on the
version of the driver used.
(Refer to the computer or the video card manual for
details.)
Windows 95/98/ME/XP/2000: Set the resolution at the
Control Panel, Display, Settings.
Windows 3.1: Change the resolution and the colors using
the VGA Utility provided by the video card.
* Contact the video card manufacturer for details.
Windows 95/98/ME/XP/2000: Set the function at
BIOS-SETUP of the computer or the screen saver. (Refer to
Windows/Computer Manual).
Windows 3.1: Set the function using the VGA
Utility provided by the video card.
This is normal as some sound may be generated when
the metal case and the electromagnet, which are
installed to block any electromagnetic waves, interact
with each other.
Disconnect the power cord and then clean the monitor
with a soft cloth, using either a cleaning solution or plain
water.
Do not leave any remains of the detergent nor scratch
the case. Do not allow any water to go inside the monitor.
User's Manual
Answer