Installation - Whirlpool AMW 430 Instructions For Use Manual

G
B
MOUNTING THE APPLIANCE
PRIOR TO CONNECTING
C
HECK THAT THE VOLTAGE
plate corresponds to the voltage in your
home.
D
O NOT REMOVE THE MICROWAVE INLET PROTECTION
located on the side of
PLATES
the oven cavity wall. They
prevent grease & food parti-
cles from entering the mi-
crowave inlet channels.
E the oven cavity is
NSURE
empty before mounting.
AFTER CONNECTING
T
HE OVEN CAN BE OPERATED ONLY
fi rmly closed.
2

INSTALLATION

F
OLLOW THE SUPPLIED
structions when installing the appliance.
on the rating E
NSURE THAT THE APPLIANCE IS NOT DAMAGED
that the oven door closes fi rmly against the
door support and that the internal door seal is
not damaged. Empty the oven and clean the
interior with a soft, damp cloth.
if the oven door is
The manufacturers are not liable for any
problems caused by the user's failure to ob-
serve these instructions.
separate mounting in-
D
O NOT OPERATE THIS APPLIANCE
damaged mains cord or plug, if it is not
working properly, or if it has been dam-
aged or dropped. Do not immerse the
mains cord or plug in water. Keep the
cord away from hot surfaces. Electrical
shock, fi re or other hazards may result.
T
HE EARTHING OF THIS APPLIANCE
ry. The manufacturer will accept no re-
sponsibility for injury to persons, animals
or damage to objects arising from the
non-observance of this requirement.
. Check
if it has a
is compulso-