Advertisement
Owners manual
MX4800
Big bore cone valve
Introduction:
Congratulations on your purchase of the WP MX4800 Big bore cone valve for
motocross,
enduro, rally and motor sport. A copy of one of the best front forks in today's cross, and where
several riders have become world champion with.
If you have any questions about your fork, please contact your importer. He will assist you in any
way he can.
For addresses see: www.wp-group.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for WP MX4800
Summary of Contents for WP MX4800
- Page 1 MX4800 Big bore cone valve Introduction: Congratulations on your purchase of the WP MX4800 Big bore cone valve for motocross, enduro, rally and motor sport. A copy of one of the best front forks in today’s cross, and where several riders have become world champion with.
- Page 2 WP Suspension wishes you lots of success and riding pleasure with your front fork. General notice: Pay attention to the following notes, when you are working with WP suspension products as described in this owners manual. Regularly you need the special tools of WP Suspension next to the general equipment. These tools, with a unique “T”...
- Page 3 1 turn (=2 clicks)=1mm pre-load Turning it clockwise will add pre-load and turning it counter clockwise will decrease the pre-load. Use WP tool T14.028 to adjust preload Adjusting the compression: The compression adjustment screw is the screw in the center on top of the fork. Turn the compression adjuster...
- Page 4 Adjusting the riders height: To adjust the front fork unit the nuts in the triple-clamp. With help of the lines on the top of the fork you can level out your front fork. Look in the setting list to determine the riders height.
- Page 5 PRINCIPIEL SCHEMATIC OIL LEVEL Oil level 3000 2500 2000 1500 1000 Suspension travel ( mm ) Standard level More oil Less oil...
Need help?
Do you have a question about the MX4800 and is the answer not in the manual?
Questions and answers