Related Manuals for KegLand RAPT KL15813
Summary of Contents for KegLand RAPT KL15813
- Page 1 RAPT Fermentation Chamber Instruction Manual FERMENTATION CHAMBER KL15813 Instruction Manual www.KegLand.com.au Last Updated 24/06/2022 12:06 PM Page 1 of 22...
- Page 2 RAPT Fermentation Chamber Instruction Manual KegLand Distribution PTY LTD www.KegLand.com.au WARNING IF THE FRIDGE HAS JUST BEEN MOVED DO NOT TURN ON UNLESS IT HAS BEEN STANDING UPRIGHT FOR ATLEAST 24 HOURS. FAILURE TO DO SO WILL VOID WARRANTY. STAND FRIDGE IN THE UPRIGHT POSITION FOR 24 HOURS BEFORE PLUGGING INTO MAINS POWER SOCKET.
-
Page 3: Table Of Contents
(https://www.youtube.com/KegLand). You can find the link on our website www.KegLand.com.au If there is any part of these videos above that you do not understand or you cannot access please call or email www.KegLand.com.au or your nearest KegLand Distributor for more assistance. Contents ................................ - Page 4 MENUS .............................. 18 REGISTER DEVICE ........................... 18 START PROFILE/PROFILE CONTROL ....................18 SETTINGS ............................18 BLUETOOTH ........................... 20 DIAGNOSTICS ..........................20 ABOUT ............................21 CLEANING/MAINTENANCE ........................ 21 WARRANTY (AUSTRALIA) ........................22 www.KegLand.com.au Last Updated 24/06/2022 12:06 PM Page 4 of 22...
-
Page 5: Warning - Important Information
Items Included 1 x RAPT Fermentation Chamber 1 x Wire Shelf 1 x Plastic Floor Protector 2 x PCO1881 Threaded Insert 2 x Left Door Hinges www.KegLand.com.au Last Updated 24/06/2022 12:06 PM Page 5 of 22... -
Page 6: Display Legends
The display on the RAPT Fermentation Chamber will display a graph of temperature vs time by default. If instead prefer a numerical interface this can be easily changed by unselecting the Show graph checkbox in the Settings. This will show an interface like the following: www.KegLand.com.au Last Updated 24/06/2022 12:06 PM Page 6 of 22... -
Page 7: Display Icon Legend
Fermentation Chamber will then automatically send power to the heating or cooling terminals to power on your heating or cooling device to maintain this target temperature. NOTE: This is possible only if the device is not currently running an assigned profile. www.KegLand.com.au Last Updated 24/06/2022 12:06 PM Page 7 of 22... -
Page 8: Starting A Temperature Profile Manually
1. Sign up for a RAPT Account 1. Sign up for an account on the RAPT portal. https://app.rapt.io/ 2. Once signed up log in to your account on the RAPT website. www.KegLand.com.au Last Updated 24/06/2022 12:06 PM Page 8 of 22... -
Page 9: Connect The Rapt Fermentation Chamber To Your Wi-Fi
KegLand RAPT Wi-Fi Access Point using the Wi-Fi name and password displayed on the screen on your RAPT Fermentation Chamber. 2. Your mobile device should then automatically open a browser to the KegLand RAPT Access Portal. 3. Select your Wi-Fi network, enter your Wi-Fi password and select Join. This will connect your RAPT Fermentation Chamber to your Wi-Fi network. -
Page 10: Starting A Temperature Profile From The Rapt Portal
3. Register your device on your account on the RAPT Portal. 4. Set your target temperature on the RAPT Fermentation Chamber manually or through the RAPT Portal. Alternatively, you can begin a Fermentation profile on the RAPT Portal. www.KegLand.com.au Last Updated 24/06/2022 12:06 PM Page 10 of 22... -
Page 11: Troubleshooting Registration And Telemetry
1. Go to the settings menu on your RAPT Fermentation Chamber. 2. Navigate to clear registration and press select (⏎). 3. Register your device to your RAPT account according to the instructions. www.KegLand.com.au Last Updated 24/06/2022 12:06 PM Page 11 of 22... -
Page 12: Updating Firmware
3. Cleanly cut an 82mm length of EVABarrier hose and insert this firmly into the BlowTie Spunding Valve or Inline Regulator and duotight elbow. Ensure that the arrow on the side of the Spunding Valve or Inline regulator is pointing towards the RAPT Fermentation Chamber. www.KegLand.com.au Last Updated 24/06/2022 12:06 PM Page 12 of 22... -
Page 13: Side Mounting
It is recommended to regularly check the drip tray and empty as required. To enable this, remove the four screws holding the front panel in place. www.KegLand.com.au Last Updated 24/06/2022 12:06 PM Page 13 of 22... -
Page 14: Leak Test Procedure
Step 3: Adjust the pressure on the regulator to 20psi. Step 4: Turn the CO cylinder valve handles off. Step 5: Wait two hours and ensure the pressure reading on the pressure gauge on the regulator has not changed. www.KegLand.com.au Last Updated 24/06/2022 12:06 PM Page 14 of 22... -
Page 15: Extension Probe Installation & Calibration
Once both calibration points have been set the NTC temperature probe has been calibrated. For a video guide on how to install and calibrate this longer extension temperature probe please refer to the following instructional YouTube video: https://www.youtube.com/watch?v=7l0RtVw6-QM www.KegLand.com.au Last Updated 24/06/2022 12:06 PM Page 15 of 22... -
Page 16: Default Temperature Probe Calibration
Send Profile To Device option in the RAPT Portal. The RAPT ecosystem is intended to be largely controlled remotely, and thus there are more powerful controls in the RAPT Portal. www.KegLand.com.au Last Updated 24/06/2022 12:06 PM Page 16 of 22... - Page 17 Manual alterations to the current profile will also be reflected in the RAPT portal after a short interval. To access the Menus, press the Enter key then scroll down to desired menu. Press Enter to access the menu. www.KegLand.com.au Last Updated 24/06/2022 12:06 PM Page 17 of 22...
-
Page 18: Menus
Navigate to the advanced setting you need to adjust and press select (⏎) on this setting. Then use the Up or Down arrow to adjust the set value for the setting. www.KegLand.com.au Last Updated 24/06/2022 12:06 PM Page 18 of 22... - Page 19 Disables WiFi (if you wish to not use the RAPT Portal) Disable WiFi Clear Registration Clears RAPT Portal registration (see Troubleshooting) Low Temp. Alarm This is the temperature below which an alarm will sound (default -10°C) www.KegLand.com.au Last Updated 24/06/2022 12:06 PM Page 19 of 22...
-
Page 20: Bluetooth
The Diagnostics menu contains information about the RAPT Fermentation Chamber. This includes such information as current firmware version, Wi-Fi network and signal strength, MAC address and IP address of the device. www.KegLand.com.au Last Updated 24/06/2022 12:06 PM Page 20 of 22... -
Page 21: About
The outside of the RAPT Fermentation Chamber can be cleaned with a microfibre cloth. The inside of the chamber should be periodically cleaned with a mild detergent and a microfibre cloth. Periodically check and empty the drip tray as required. www.KegLand.com.au Last Updated 24/06/2022 12:06 PM Page 21 of 22... -
Page 22: Warranty (Australia)
If you purchased your unit from an international distributor, you will be required to go through their warranty claims process. Terms & Conditions For a full terms and conditions, please visit our website here -> www.KegLand.com.au Last Updated 24/06/2022 12:06 PM Page 22 of 22...