Related Manuals for KegLand RAPT KL15813
Summary of Contents for KegLand RAPT KL15813
- Page 1 RAPT Fermentation Chamber Instruction Manual Fermentation Chamber / Fridge KL15813 Instruction Manual KegLand Distribution PTY LTD www.KegLand.com.au Last Updated 1/03/2022 4:36 PM Page 1 of 13...
- Page 2 ENSURE THERE IS OVER 100 mm CLEARANCE AT THE BACK OF THE RAPT FERMENTATION CHAMBER TO ALLOW FOR ADEQUATE AIR FLOW AND VENTILATION WARNING BE CAREFUL NOT TO CONTACT THE EXPOSED COLD PLATE WHEN ADDING OR REMOVING FERMENTERS OR KEGS. www.KegLand.com.au Last Updated 1/03/2022 4:36 PM Page 2 of 13...
- Page 3 (https://www.youtube.com/KegLand). You can find the link on our website www.KegLand.com.au If there is any part of these videos above that you do not understand or you cannot access please call or email www.KegLand.com.au or your nearest KegLand Distributor for more assistance. Important Let the RAPT Fermentation Chamber / Fridge sit upright for at least 24 hours after delivery or after sitting the unit on its side before turning the unit on.
-
Page 4: Items Included
2. If you have not created an account you can sign in with your Google or Facebook accounts. Otherwise you can create an account using your email. 3. Once the account has been created you can sign in to the RAPT Portal www.KegLand.com.au Last Updated 1/03/2022 4:36 PM Page 4 of 13... -
Page 5: Device Registration
Wi-Fi network. Open your network and internet settings on your mobile device, tablet or computer and connect to the KegLand RAPT wifi network using the password shown on the screen on your RAPT Fermentation Chamber. This will allow you to connect your RAPT Fermentation Chamber to your wifi network. - Page 6 RAPT temperature controller and rotate this such that it is upright. This can be done easily by removing the two bolts which hold the gauge housing in place and pulling up on the gauge to remove it. www.KegLand.com.au Last Updated 1/03/2022 4:36 PM Page 6 of 13...
-
Page 7: Leak Test Procedure
It is best to conduct a pressure decay test on the fermenter itself and on the incoming gas line into the duotight inline regulator from the CO2 cylinder and regulator to ensure your entire system has no leaks. www.KegLand.com.au Last Updated 1/03/2022 4:36 PM Page 7 of 13... -
Page 8: Temperature Probe Calibration
2: NTC ref. temperature: 298.2 K 3: NTC ref. resistance: 1000000 Manual calibration of the internal temperature probe can be performed using the same method as outlined for the extension probe. www.KegLand.com.au Last Updated 1/03/2022 4:36 PM Page 8 of 13... - Page 9 This will display the currently selected profile. If no profile is running, any profile that has previously been sent to the RAPT device can be selected and started from this screen. www.KegLand.com.au Last Updated 1/03/2022 4:36 PM Page 9 of 13...
- Page 10 To access the Setting Menu, press the Enter key then scroll down to Settings. Press Enter to access the menu Show Graph This toggles the display from the graph (default) to a simple numerical display www.KegLand.com.au Last Updated 1/03/2022 4:36 PM Page 10 of 13...
- Page 11 Light On The light can be toggled between Always On, Always Off and Automatic (recommended) Sounds Enabled Toggles the sounds on or off. www.KegLand.com.au Last Updated 1/03/2022 4:36 PM Page 11 of 13...
- Page 12 This will disconnect the RAPT Chamber from the network and forget current wifi settings. It will also restart the device. Disable WiFi This will disconnect the RAPT Chamber from the network and disable the WiFI. It will also restart the device. www.KegLand.com.au Last Updated 1/03/2022 4:36 PM Page 12 of 13...
- Page 13 If you purchased your unit from an international distributor, you will be required to go through their warranty claims process. Terms & Conditions For a full terms and conditions, please visit our website here -> www.KegLand.com.au Last Updated 1/03/2022 4:36 PM Page 13 of 13...