3. DISASSEMBLY
Wire Housing
6.
Separate the magnetic switch. (Figure 9)
Bottom gill
magnetic switch
3-5 DISPLAY BOARD BOX ASSEMBLY
(Models:RW54N1SSD)
1. Loosen the screws. (Figure 10)
Screw
2.
Pull forward the Display board box Assy . (Figure 11)
Figure 8
screw
Figure 9
Figure 10
Display board box Assy
Figure 11
Figure 11
3.
The Display board box Assy. (Figure 12)
LED LIGHT
(Model:RW46N1DSD)
1. Separate the two screws under the Display board box Assy.
(Figure 13)
2. Insert a screwdriver on the left hole. (Figure 14)
3.
Pull forward the claw and raised the Display board box
Assy a bit. (Figure 15)
4. Repeat on the right hole. Separate the lead wire Housing.
(Figure 16)
- 5 -
left hole
Display board
LED LIGHT
Figure 13
Figure 14
Display board
box Assy
claw
Screwdriver
Figure 15
Figure 16
Wire Housing
right hole
Figure 12
Screw